Learn More

click here to return to main products menu

EXTREME DUTY BRUSH CUTTER

The extreme duty brush cutter is a high-powered, low flow, direct drive unit with a 2-year warranty. The hydraulic motor drives a 2 5/8” shaft that is housed in 2 massive bearings submerged in oil. Under the deck, instead of a spline shaft, it has a 13” x 1” flange with 10 countersunk bolts connecting the blade carrier. The wire protection kit between the deck and the blade carrier keeps fence wire and vines away from the lower bearing seal and reduces down time from hidden debris. This powerful yet quiet cutter will produce a cleaner cut at a quicker travel speed than was thought possible on a low flow skid steer. The 10” deck clearance and the raised back allow cut debris to escape and to easily avoid bunching under the deck.


Call us at 1-888-376-7027 or use our contact form to find a dealer near you!

Features Include

  • Chain curtains front and back
  • 4 double edged blades (72” only)
  • Requires only 16 GPMs
  • Cuts up to 5” trees
  • Wire protection kit under deck
  • Rugged deck with heavy reinforcements
  • 2 year warranty
  • Visible sight glass to check oil level

Extreme Duty Brush Cutter Specifications

 

 

Closed Front Brush Cutter

CLOSED FRONT VERSION

Loading the player ...

OPEN FRONT BRUSH CUTTER

This open front brush cutter uses the same drive line as the closed front, but the deck design allows for cutting up to 6” material at ground level. The heavy duty push bar keeps the cut trees from falling back on the skid steer. Hydraulic flow requirements are still only 16 GPMs Minimum so that most 50 HP and larger skid steers can run this cutter with the performance of a high flow cutter! Never has such high performance, commercial grade work been accomplished by a low flow machine!


Call us at 1-888-376-7027 or use our contact form to find a dealer near you!


Open Front Brush Cutter

 

Open Front Brush Cutter in Action

OPEN FRONT VERSION

 

Loading the player ...

 

 

 

Loading the player ...

 

 

 

Closed Front Brush Cutter at Work

 

 

 

 

 

 

HEAVY DUTY BRUSH CUTTER

The heavy duty brush cutter is an excellent mid-range brush cutter capable of up to 2.5” thick brush. This three blade cutter is a direct drive that requires only 16 GPM to operate.


Call us at 1-888-376-7027 or use our contact form to find a dealer near you!

Features Include

  • 8” deck clearance
  • 1 year warranty
  • 3 blades on 72” and 2 blades on 60"
  • Direct drive
  • 60” and 72” widths
  • Chain curtain on front
  • 3 bi-directional blades
  • 3 blade 72" capable of cutting 3" material
Heavy Duty Brush Cutter
Heavy Duty Brush Cutter Specifications