Skid Steer Attachments

Features include:

• Trench and install fencing in once pass
• 40º pivot to either side of center for turning
• Fits up to 30” diameter roll
• Spring loaded coulter easily cuts through trash, roots and other debris
• Installs up to 20” deep
• Fits 36”, 42” and 48” tall fencing
• Sliding offset mount allows for installation next to buildings/structures
• No hydraulics = minimal maintenance
• Install thousands of feet of fencing per hour

Features include:

• NEW heavier moldboard design
• NEW even heavier cylinders
• NEW electrical, now compatible with Bobcat 7-pin
• NEW grease fittings on all cylinder pins
• NEW added protection on electrical and hydraulic valve components
• Tried and proven tilt system
• Optional trip springs
• Trip override pin
• Replaceable skid shoes
• Replaceable bolt-on edge
• Optional 8″ blade height extension

Features include:

• 3-year warranty
• Mono-block design / no tie rods
• Anti-blank firing system hydraulic brake
• No re-gassing needed
• Only 2 internal moving parts
• 2 speed control / variable stroke
• Quiet operation
• Self-regulating
• Body bushings around piston

Features include:

• Adjustable tines
• Available sizes: 48″, 60”, 72”, 84”, and 96″
• Optional finishing rake
• 1-year warranty

Features include:

• 1” or smaller material will flow through
• Horizontal shafts, fitted with poly stars that rotate in the same upwards direction
• Hardened steel cutting edge
• 2-position mount plate
• Hoses and couplers included
• Mounts available to fit most machines
• 1-year warranty

Features include:

• 3/4″ sides
• 1″ x 8″ cutting edge
• Cast replaceable teeth
• Reinforced quick attach for prying
• Powder coat paint

Features include:

• 26” high back
• 38” deep front to back
• Reinforced back and floor
• Pre drilled for bolt-on edge option
• Available in 3/16” wrap or 1/4” wrap

Features include:

• Aggressive toothed 16″ auger with 2 ¼ x ¼” ribbon flighting
• 4 blade fan, 22″ diameter, 6 1/2″ deep
• No shear pins; high pressure bypass relief system
• No chains; direct drive auger and fan
• 270^◦ hydraulic rotary chute with 7” opening
• Hydraulic chute deflector
• Adjustable hardened steel skid shoes
• 7 gauge steel fan housing
• 10 gauge steel blower shell
• 1/4″ end plates
• High strength corner bracing
• Heavy duty polyurethane idler wheels
• Bolt-on grader cutting edge

Features include:

• Universal Mount – allows for one standard attachment for skid steers and mini skid steers, no need for special hook ups or attachments
• Electric Hydraulic Controls – electric controls over hydraulics make it easy to position the blade with a different angle or tilt
• Double Hydraulic Cylinders – quick connect couplers allow easy for access to any skid steer or mini skid steer machine with below or above 50 HP
• Adjustable Depth Guides – manually adjust the spacers on the skid shoes to modify the blade height to allow control over blade height and surface contact

Features include:

• 3 horizontal structural tubes from side to side
• 2 vertical reinforcement gussets to tie all 3 structural tubes together with the quick attach
• 3/4″ AR400 wear shoes
• 1/4″ side plates
• Rubber cutting edge
• Rolled mouldboard to keep snow load live
• Pull-back option available
• Available in 72″ (665 lbs.), 96″ (770 lbs.), and 120″ (875 lbs.)
• Powder coated

Features include:

• 2 horizontal structural tubes from side to side
• 3/4″ AR400 wear shoes
• 1/4″ side plates
• Rubber cutting edge
• Rolled moldboard to keep snow load live
• Pull-back option available
• Available in 72″, 96″, and 120″
• Powder coated

Features include:

• Can be mounted to roll out while driving either forward or in reverse
• Comes in 36″, 42″, 50 widths
• Easy to use and adjustable

APPLICATIONS:

• Barbed wire rolls
• Cable
• Wire

Features include:

• Spreads up to 40 feet
• Optional vibrator kit
• Comes with top screen
• 3″ vertical super flow auger
• 10″ spinner

Features include:

• Available in 72” and 84” widths
• 22″ blade height
• Optional bolt-on 8″ height extension
• Full-trip mouldboard
• Steel cutting edge
• Hydraulic angle

Features include:

• 1-year warranty
• 3 cast # 230 replaceable teeth
• 3″ and 4″ square tubes
• 56″ long
• Formed bottom with 1″ x 8″ cutting edge
• Heavily gusseted quick attach
• Reverse curled teeth up both sides
• Curved bottom for better leverage
• Narrow profile digs without wedging into the ground
• NEW chain slot tie downs for securing stumps for transfer

Features include:

• High torque (97% efficient) radial piston motor
• 3 low flow and 3 high flow models
• No electrical needed
• Cuts while moving in forward and reverse
• Cuts 12″ below ground level (and beyond in larger holes)
• Excellent visibility
• Compact
• Requires case drain line

Features include:

• Reach advantage over our typical cutter
• Can be used as a side cutter
• Direct drive piston motor with max 4000 PSI
• 3″ x 16″ tilt cylinders
• 5/8″ AR400 Blades
• 44″ cut
• 4″ cutting capacity
• Requires case drain
• Optional universal, 8-pin, or 14-pin wiring harnesses are available

*One-year warranty does not cover the blades and hoses.

Features include:

• 6-way cutting positioning (up/down, side/side, in/out)
• Piston motor for best-in-class cutting efficiency
• Built with oversized components for longevity
• Unit weighs 1,740 lbs
• 26″ wheel with 30 durable green teeth
• Push blade for backfill
• Best suited for machines with 50-95 HP
• Chain guard for debris

Features include:

• Designed for permanent taproot removal
• Heavy duty 3/4″ steel construction
• Weighs 285 lbs
• Great visibility

Features include:

• Enclosed cylinder
• Heavily gusseted quick attach
• 4 rows of teeth
• Heavy pins and bushings at all pivot points
• Weighs 415 lbs
• Opens to 11″
• 1-year warranty
• Hoses and couplers included

Features include:

• Cuts up to 12″
• 5″ x 12″ cylinder
• 29 tons of cutting force at 2500 PSI
• Cutting head rotates 90 degrees
• 1″ thick T1 steel cutting edge and construction
• Excellent visibility

Features include:

• Extended auger
• Adjusting foot to keep trench depth consistent
• Depths: up to 36″ or 48″
• Cut widths: 4″, 6″, 8″, 10″, and 12″
• Chain types: dirt, rock, and combo
• Spring-loaded, self adjusting crumber for sweeping the trench clean
• Manual adjusting side shift
• Side auger to prevent dirt falling back into the trench
• Eaton drive motor

Features include:

• Available in 72”, 78”, 84”, 90”, and 96” widths
• Tooth or smooth cutting edge
• Smooth comes standard with bolt-on cutting edge
• Safety steps for easy access
• ½” thick back wall
• 6 wear bars on the bottom
• Reinforced mount for extra capacity

Features include:

• High capacity 28” high x 37” deep
• ¼” material in the back and floor
• Double plate reinforcement on mount
• Heavy top cross bar and boxed in bottom corner for strength
• Smooth model includes a bolt-on-edge
• Rolled back for easy clean out
• Increased capacity
• ½” wear bars on bottom
• Safety steps
• High capacity has mesh for high visibility

Features include:

• Easy to transport and store
• Available with 4″, 6″, 9″, or 12″ adapter
• Requires 7-26 GPM auxiliary flow
• Weighs 540 lbs.
• Optional tilt function
• Interchangeable mount

Features include: