Skid Steer Brush Cutter | Heavy Duty Open Front | Blue Diamond Attachments
Skip to content
Blue Diamond Attachments
Home | Attachments | Skid Steer Attachments | Skid Steer Brush Cutters | Brush Cutter - Heavy Duty Open Front

SKID STEER ATTACHMENTS

BRUSH CUTTER – HEAVY DUTY OPEN FRONT - 60" and 72"

The Blue Diamond® Heavy Duty Open Front Brush Cutter delivers powerful, dependable performance for cutting grass, heavy brush, and trees up to 5" in diameter. Available in 60" and 72" cutting widths, it features a reinforced ¼" steel deck, heavy-duty push bar, oil-filled direct drive system, and three swing-away blades for aggressive cutting and long-lasting durability. Standard-flow motor options from 11–22 GPM provide an ideal match for skid steers up to 75 HP.

Find a Dealer
Open Front Brush Cutter HD S3 left angle trans cmyk SS HD Open Front Brush Cutter AC 1 Open Front Brush Cutter HD S3 front bar Open Front Brush Cutter HD S3 blade Brush Cutter Heavy Duty Open Front w Bullets trans SS HD Open Front Brush Cutter AC 2

Product Details

Download Brochure
  • 60 and 72-inch cutting widths
  • Cuts up to 5” material and handles thick brush and small trees with confidence
  • Recommended for host machines with up to 75 HP
  • Three 1/2” double-sided, drop-down blades rotate on a 3/4” steel blade carrier
  • 80 CC, 100 CC, and 130 CC Eaton geroler hydraulic motor options
  • Oil-filled direct drive system engineered to prevent lower bearing seal failure
  • Heavy-duty push bar for operator safety
  • ¼" steel deck with structural cross-bracing provides strength and rigidity
  • Rear chain curtain minimizes discharge
  • Bi-directional cutting control from the cab without hose swaps
  • Fully enclosed motor keeps out the debris and reduces overheating
  • Maximum operating pressure of 4,100 PSI
  • No case drain required
  • Safety windshield required for operator protection
  • Universal skid steer mount

Looking for replacement blades?

Part Number Model Required Flow Maximum PSI Weight
Part Number103002 Model60” HD Open Front Brush Cutter, 80 CC Required Flow11-16 GPM Maximum PSI4,100 Weight1,223 lbs
Part Number103003 Model60” HD Open Front Brush Cutter, 100 CC Required Flow17-20 GPM Maximum PSI4,100 Weight1,262 lbs
Part Number103011 Model72” HD Open Front Brush Cutter, 130 CC Required Flow15-22 GPM Maximum PSI4,100 Weight1,370 lbs
Part Number Model Required Flow Maximum PSI Weight
Part Number203027H-KIT Model72" HD Blade Kit (3 blades w hardware) Required Flow Maximum PSI Weight38 lbs
Part Number203028-KIT Model60" HD Blade Kit (3 blades w hardware) Required Flow Maximum PSI Weight31 lbs