Skid Steers

Brush Cutter – Extreme Duty Closed Front

This brush cutter is the most versatile skid steer brush cutter on the market. Cuts grass like a lawn mower and still cut 5″ trees!! Why buy a brush cutter that limits you to one or the other? Very few, if any other cutters are able to perform in such a variety of applications, like the Blue Diamond Extreme Duty cutters will!

Brush Cutter – Extreme Duty Closed Front Image & Features

The extreme duty brush cutter is a high-powered, low flow or high flow direct drive unit with a 1-year warranty. The purpose built hydraulic motor drives a 3.5” forged one piece drive spindle!  that is housed in 2 massive bearings. The direct drive bearing carrier is now grease packed and can be greased from a zerk under the hood. This new improvement has dramatically reduced down time and bearing failures! Under the deck, instead of a spline shaft, it has a 13” x 1” flange with 10 bolts connecting the blade carrier. The wire protection kit between the deck and the blade carrier keeps fence wire and vines away from the lower bearing seal and reduces down time from hidden debris. This powerful yet quiet cutter will produce a cleaner cut at a quicker travel speed than was thought possible on a low flow skid steer. The 10” deck clearance and the raised back allow cut debris to escape and to easily avoid bunching under the deck.

Features include:

  • no case drain needed on low flow units
  • new faster acting external cross port relief and brake
  • new longer lasting stamped blades
  • available in low or high flow

Product Specs

Part Number
Req Flow
60" low flow- closed front
16-26 GPM
1,170 lbs
72" low flow-closed front
16-26 GPM
1,617 lbs
72" high flow-closed front
27-35 GPM
1,585 lbs
72" high flow-closed front
36-45 GPM
1,585 lbs

Find your nearest blue diamond® Dealer

Over 3500 Dealers across North America