Skid Steer Attachments
Power Rakes
Features include:
- 6000 series motor weighs twice what competitive models do, and has around 40% more torque.
- 4” x 4″ square tube frame.
- 18 – 26 GPM hydraulic flow, max 4000 PSI
- Optional replaceable teeth versus fixed teeth that require welding to replace.
- 1.5” spindle on castors with spacers versus friction adjusters that work loose.
- Airless tires – no flats.
- 1” front wheel axles versus competitive ¾”.
- 1.5” motor shaft and high pressure seals.
- 5 position, 20 degree angle, manual or hydraulic.
- Optional bolt-on skid shoes add 30% load capacity over side plates alone.
- 6 3/4” drum diameter, 10 3/4” including teeth.
- Replaceable teeth hardness is HRC 50.
- Double struts on the castors.
Features include:
- 7” diameter drum with 1.5” teeth
- Chain drive unit for increased torque
- Pre-lubricated chain for easy service
- Spindles on drum are 1 3/8” diameter in greaseable bearings
- Drum widths: 48”, 60” and 72”
- Overall width 9” more than drum width
- 7/8” greaseable axles on wheels
- Airless tires
- Flip up wheels
- 1.25” spindles with adjustable height
- Bolt-on mount
Features include:
- 6,000 Series hydraulic motor
- Airless tires
- Weld-on, replaceable, and carbide teeth options
- 3/8” thick wall tube frame
- 1.5” motor shaft and high pressure seals
- 8” drum diameter, 13” including teeth