3 Point Hitch Silt Fence Installer
Features include
- Trench and install fencing in one pass
- 40º pivot to either side of center for turning
- Fits up to 30″ diameter roll
- Spring loaded coulter easily cuts through trash, roots and other debris
- Installs up to 20″ deep
- Fits 36″, 42″ and 48″ tall fencing
- Sliding offset mount allows for installation next to buildings/structures
- Install thousands of feet of fencing per hour
Autowing Snow Plow Blade
Features include
- 103” width
- 29” blade height
- Side wings adjust automatically
- Full-trip mouldboard
- Steel cutting edge
- Hydraulic angle
- 6° oscillation to follow ground contour
Heavy Duty Series 2 Multi-Purpose Blade
Features include
- Available in 84”, 96”, 108”, and 120” widths
- 28” blade height
- Optional bolt-on 8” height extension
- Full-trip mouldboard
- Steel cutting edge
- Hydraulic angle
Tractor Hay Spear
Features include
- Available to fit category 1 or category 2 hitch
- Main spear capacity: 3,500 lbs.
- Allows bale handling on small tractors without front end loaders
- Two removable stabilizers
Standard Duty Series 2 Multi-Purpose Blade
Features include
- Available in 72” and 84” widths
- 22″ Blade height
- Optional bolt-on 8″ height extension
- Full-Trip mouldboard
- Steel cutting edge
- Hydraulic angle
Standard Duty Series 2 Multi-Purpose Blade
Features include
- Available in 72” and 84” widths
- 22″ Blade height
- Optional bolt-on 8″ height extension
- Full-Trip mouldboard
- Steel cutting edge
- Hydraulic angle
Mini Excavator Brush Cutter – Severe Duty Series 2
Features include
- 6” diameter cutting capacity
- Deck cutouts to expose blades
- Fits 10,000 – 19,000 lb machines
- No case drain needed
- 3/4” thick blade carrier
- Direct drive is filled with oil
- Improved wire protection for the oil seal
Auger Adapters
Check out our Blue Diamond® Auger Adapters listed below.
Heavy Duty Series 2 Multi-Purpose Blade
Features include
- Available in 84”, 96”, 108”, and 120” widths
- 28” blade height
- Optional bolt-on 8” height extension
- Full-trip mouldboard
- Steel cutting edge
- Hydraulic angle
Brush Cutter – Severe Duty Series 2
Features include
- 10″ cutting capacity
- 72″ cutting width
- 4 double-sided blades
Nursery Fork – Standard Duty
Features include
- Opens to 60” at the tips
- 3,000 lb. capacity
- 65” length tines
- Greaseable pivot points
- Curved backrest
Forklift Push Broom
Features include
- Safe around people and animals
- Less dust than a rotary broom
- Does not require auxiliary power
- Also available to fit forklifts and mini skid steers
- Moves anything from dust to small rocks
- Maintenance free
- 1 year warranty
Tractor Grapple
Features include
- 1″ thick steel end tines
- Constructed of 1/2″ steel
- 8″ spacing between tines
- Opens to 42″
- Dual acting cylinders
- Available with Universal skid steer, Euro-Ag/Global, or JD 300/400/500 mount
- 60″, 66″, & 72″ widths available
- Hoes included with 1/2″ flat face couplers
- OEM colors available
Roof Truss Jib
Features include
- Up to 220″ additional reach
- 1,200 lbs capacity
- 48″ hydraulic extension, 24″ manual extension
- 2 1/2″ hole for hooking chains and straps
- Ideal for setting roof trusses or beams
AUGER – EXTREME DUTY SERIES 2 – Excavator
Features include
- Compact high torque manufactured gearbox
- 2 piece shaft design ensuring maximum side load ratings
- 5-yr gearbox warranty, 3-yr motor warranty, and lifetime shaft pull-out warranty