The incredible power and versatility of a Blue Diamond® Attachments Skid Steer Brush Cutter will all but remove the need for a mulching head. These high performance, high quality cutters provide a choice of both open and closed models along with multiple widths and power options. Whether you are cutting grass or an 8” tree, we have the brush cutter to get the job done. Brush Cutters are available for skid steer, track loader, tractor, excavator, and mini skid steer machines. Note: The lifetime warranty on spindles applies only to tapered, forged spindles, which are on attachments manufactured since November 2014.  Cutters made previous to this do not have a lifetime warranty on the spindle.

Skid Steer Attachments

Brush Cutters

attachment_feature_image
Features include:
  • 84” cutting width
  • Adjustable height wheels
  • Floating deck design for uneven ground
  • Grease fittings on all pivots
  • 4 double-sided blades
  • Rated for 15-22 GPM
  • 1-year warranty
attachment_feature_image
Features include:
  • no case drain needed on low flow units
  • new faster acting external cross port relief and brake
  • new longer lasting stamped blades
  • available in low or high flow
attachment_feature_image
Features include:
  • 3.5″ (at bearing, 4″ at seal) forged one piece spindle is the toughest in the industry.
  • Grease filled drive dramatically improves bearing life and downtime due to seal damage
  • Custom purpose built motor and relief block out last industry standard motors
  • External cross-port reliefs protect motor versus internal relief valves
  • Fully enclosed motor compartment keeps out the debris that causes overheating issues, especially see in new Tier 4 version machines.
  • No rear roller to bounce off stumps or pull cut debris along. Open design allows smoother operation
  • Bi-directional cutting allows for control of the discharge angle, as well as doubling the use of the blades
attachment_feature_image
Features include:
  • Available in 60” and 72” cutting widths
  • Chain curtain minimizes discharge
  • Perimeter wire/vine guard on blade carrier
  • 3” diameter cutting capacity
  • Dual external crossover relief valves
  • 4000 Series geroler motor
  • Dual-direction cutting
  • 1 year warranty
attachment_feature_image
Features include:
  • High torque piston motor is available in the high or low flow!
  • The low flow version outperforms most competitors’ high flow models!
  • Massive 1″ thick serrated blade carrier weighs over 500 lbs.
  • Easy machine entry
  • Adjustable skid shoes
  • Cutter weighs over 2000 lbs.
  • Large pressure gauge
  • 1-year warranty
attachment_feature_image
Features include:
  • 10″ cutting capacity
  • 72″ cutting width
  • 4 double-sided blades
  • Piston motor
  • 1” thick blade carrier with serrated edge
  • Visible pressure gauge to monitor workload
  • Bolt-on wear shoes to adjust height
  • Easy machine entry
attachment_feature_image
Features include:
    • Reach advantage over our typical cutter
    • Can be used as a side cutter
    • Direct drive piston motor with max 4000 PSI • 3″ x 16″ tilt cylinders
    • 5/8″ AR400 Blades
    • 44″ cut
    • 4″ cutting capacity
    • Requires case drain
    • Optional universal, 8 pin or 14 pin wiring harness are available

*The one year warranty does not cover the blades and hoses.

Skid Steer Attachments