Tractor Attachments

Features include:

• Trench and install fencing in one pass
• 40º pivot to either side of center for turning
• Fits up to 30″ diameter roll
• Spring loaded coulter easily cuts through trash, roots and other debris
• Installs up to 20″ deep
• Fits 36″, 42″, and 48″ tall fencing
• Sliding offset mount allows for installation next to buildings/structures
• Install thousands of feet of fencing per hour

Features include:

• Compact high torque manufactured gearbox
• 2-piece shaft design ensures maximum side load ratings
• 2” hex shaft comes standard but also available with 2 9/16” round
• 5-year gear box warranty, 3-year motor warranty and lifetime shaft pull-out warranty, 4-year planetary drive warranty

Features include:

• 103” width
• 29” blade height
• Side wings adjust automatically
• Full-trip mouldboard
• Steel cutting edge
• Hydraulic angle
• 6° oscillation to follow ground contour

Features include:

• Optimized for the Multi-Purpose Series cutters
• Oil sight and temperature gauge on the reservoir
• Pressure relief valve for hydraulic system protection
• Heavy duty frame acts as a ballast
• 20 gallon reservoir tank
• Pump puts out 11.4 GPM of constant flow at 540 RPM (non-adjustable)
• Filled weight: 400 lbs
• Required for the 32” Multi-Purpose Cutter
• 2-year warranty

Features include:

• Adjustable ripper shanks
• Heavy duty construction
• 2-year warranty

Features include:

• 72” and 84” widths
• 26” bristles
• Manual or hydraulic options
• Poly or poly steel mix
• Stands protect bristles when not in use
• 14-pin OEM connector available
• 1-year warranty
• Optional water kit

Features include:

• Fully welded gear-box channel and deck
• Replaceable wear skids
• 1.5” diameter cutting capacity
• 5-year limited gear-box warranty
• Front/rear chain discharge shield
• 2-year warranty

Features include:

• Fully welded cutter deck
• Heavy duty round back design
• 2.5”-3” cutting capacities
• 5-year limited gear-box warranty
• Full welded cutter gears 0.5” thick
• Slip clutch protection and safety chains come standard
• Replaceable wear skids
• Chain discharge shields

Features include:

• Fully welded cutter deck and gearbox channel
• 3” diameter cutting capacity
• 5-year limited gearbox warranty
• Replaceable wear skids
• Compact dual spindle design
• Slip clutch protection/dual couplers and front/rear chain discharge shields come standard
• 2-year warranty

Features include:

• Pull type hitch with hydraulic rear wheels
• 3” diameter cutting capacity
• Slip clutch protection, dual shock couplers and front/rear chain discharge shields come standard
• Laminated flat-proof wheels
• 2-year warranty
• 5-year limited gearbox warranty

Features include:

• Dual cutting edges
• Side plates to float the cutting edges along the surface
• Adjustable/removable shanks with replaceable teeth
• Shank adjustment at grade level. 1 1/2” & 3” below grade level
• 2-year warranty

Features include:

• Useable on front or rear of a tractor
• Quickly converts tractor to turf maintenance
• 2-year warranty
• Adjustable cutting depth

Features include:

• Multi-purpose for grass and brush up to 1.5”
• Dual tapered bearing design for easy adjustment
• Minimum tractor weight of 2,000 lbs
• Counterweight recommended
• 1.5” brush capacity
• Hydraulic side shift
• Rear anti-scalp roller
• 2-year warranty

Features include:

• Ratchet jack offset adjustment
• Fits Category 1 and 2 hitches
• Used for grading, leveling, and backfilling needs
• 5-position angle in forward and reverse 3-position tilt adjustment
• 2-year warranty

Features include:

• Dual full length tines
• Can be used as pallet forks
• Add-on back rack available
• Single, double, or quad Spears
• Optional bolt-on rack
• 3,500 lb. spear capacity
• Euro-Ag/Global and John Deere 400/500, 600/700 mounts available
• Powder coat paint

Features include:

• Single, double, or quad spears
• Optional bolt-on rack
• 3,500 lb. spear capacity
• Euro-Ag/Global and John Deere 400/500, 600/700 mounts available

Features include:

• Available in 84”, 96”, 108”, and 120” widths
• 28” blade height
• Optional bolt-on 8” height extension
• Full-trip mouldboard
• Steel cutting edge
• Hydraulic angle

Features include:

• Dual independent clamps
• 3/8” steel
• Greasable 1” pivot pins
• One piece tines (root grapple)
• Flat face couplers included
• Opens to 30”

Features include:

• 16” plowshare length
• Replaceable share and moldboard
• 2-year warranty
• Not quick hitch compatible

Features include:

32” MODEL:

• Multiple cutting positions
• Dual tapered bearing design for easy adjustment
• 9-14 gpm
• Universal Skid Steer
• 32” cutting width
• Up to 3” cutting capacity
• Minimum tractor weight of 2,000 lbs
• Counterweight recommended
• 2-year warranty
• Note: Hydraulic hose are not supplied on Multi-Purpose cutters because of the wide variance in length. Hoses, couplers, fitting, and related pieces need to be supplied by the dealer or customer.

44” MODEL:

• Multiple cutting positions
• Dual tapered bearing design for easy adjustment
• Two motor options:
  • 9-14 gpm
  • 15-20 gpm
• Four mounting options available:
  • Universal Skid Steer
  • John Deere 400 and 500
  • Euro/Global
  • Universal Pin On
• 44” cutting width
• Up to 3” cutting capacity
• Minimum tractor weight of 3,000 lbs
• Counterweight recommended
• 2-year warranty
• Note: Hydraulic hose are not supplied on Multi-Purpose cutters because of the wide variance in length. Hoses, couplers, fitting, and related pieces need to be supplied by the dealer or customer.

Features include:

• Easy-to-see-through frame
• Powder coated
• 48” tines are 1.5″ thick and easily adjustable
• Available with or without the side steps

Features include:

• Available in 72″, 84″, and 96″ widths
• 4″ x 4″ square tube frame
• PTO requires 540 RPM
• Optional replaceable teeth versus fixed teeth that require welding to replace
• 1.5″ spindle on castors with spacers versus friction adjusters that work loose
• Airless tires prevent the frustrating aggravation of flat tires
• 1″ wheel axles versus competitor’s 3/4″
• 5 position, 20 degree angle
• Optional hydraulic angle kit
• Optional bolt-on skid shoes add 30% load capacity over side plates alone
• 6″ drum diameter, 10″ including teeth
• Double struts on the castors

Features include:

HEAVY DUTY GRAPPLE

• 1/2″ top tines
• Centered protected cylinders
• Protected hydraulic lines

STANDARD GRAPPLE

• 3/8″ top tines
• Light weight for small machines
• Dual cylinders

Features include:

• Smooth top deck design
• Protected gearboxes and drivelines
• 144” cutting width
• 2-year warranty

Features include:

• Protected gearboxes and drivelines
• 180” cutting width
• 2-year warranty
• 3.5” Cut Capacity
• Comes standard with slip clutches and chain guards

Features include:

• Available in 4’, 5’, 6’, or 7’
• Up to 8” cutting depth
• Heavy duty gear-driven system
• 2-year warranty

Features include:

• 32″ high back, 38″ bottom
• Mesh in back for increased visibility
• Ribs inside to strengthen floor and back
• Pre-drilled for optional bolt-on edge

Features include:

Standard Duty:

• 2 horizontal structural tubes from side to side
• 3/4″ AR400 wear shoes
• 1/4″ side plates
• Rubber cutting edge
• Rolled moldboard to keep snow load live
• Pull-back option available
• Powder coated

Heavy Duty:

• 3 horizontal structural tubes from side to side
• 2 vertical reinforcement gussets to tie all 3 structural tubes together with the quick attach
• 3/4″ AR400 wear shoes
• 1/4″ side plates
• Rubber cutting edge
• Rolled mouldboard to keep snow load live
• Pull-back option available
• Powder coated