Skid Steer Attachments

Features include:

• Compact high torque manufactured gearbox
• 2 piece shaft design ensuring maximum side load ratings
• 5-yr gearbox warranty, 3-yr motor warranty, and lifetime shaft pull-out warranty

Features include:

• Moderate ground conditions
• Fabricated boring head
• Hardened bolt on teeth
• Hardened fishtail point
• 4′ standard length
• Heavy Duty double flighting

Features include:

• 103” width
• 29” blade height
• Side wings adjust automatically
• Full-trip mouldboard
• Steel cutting edge
• Hydraulic angle
• 6° oscillation to follow ground contour

Features include:

• 3 1/2″ bore, 20″ stroke cylinder
• Linkage between cylinder and bucket
• Includes flat face couplers
• Bucket sizes comes in 9″, 12″, 18″ and 24″
• Large capacity bucket
• Heavy duty cast replaceable teeth
• Grease fittings on all pivot points
• Quick off and on machine
• No specific machine requirements
• Easy to operate
• Requires no electrical hookups

Features include:

• Equalizer bar comes standard
• Hoses and flat face couplers included
• Handles up to 60″ hay bales
• Strong tubular design
• One year warranty
• Flat face couplers
• Use on skid steers or tractors with universal mount
• Opens to 72″

Features include:

•  60″, 72”, 84” and 96″ widths
•  26” diameter bristles
•  Manual or hydraulic options
•  Poly or poly steel mix
•  Stands protect bristles when not in use
•  14 pin OEM connector available
•  1 year warranty
•  Optional water kit (25 gallon)
• Pivot Angle of 30 degrees

Features include:

• Safe around people and animals
• Less dust than a rotary broom
• Does not require auxiliary power
• Most mounts available to fit forklifts, skid steers, and mini skid steers
• Moves anything from dust to small rocks
• Maintenance free
• 1 year warranty

Applications:

• Cleaning roads in new home developments
• Farms, parks, and trails
• Sweeping out van trailers
• Industrial, barge, and ship cleanup
• Demolition sites
• Recycling and transfer stations

Features include:

• 84” cutting width
• Adjustable height wheels
• Floating deck design for uneven ground
• Grease fittings on all pivots
• 4 double-sided blades
• Rated for 15-22 GPM
• 1-year warranty

Features include:

• No case drain needed on low flow units
• New faster acting external cross port relief and brake
• New longer lasting stamped blades
• Available in low or high flow

Features include:

• 3.5″ (at bearing, 4″ at seal) forged one piece spindle is the toughest in the industry.
• Grease filled drive dramatically improves bearing life and downtime due to seal damage
• Custom purpose built motor and relief block out last industry standard motors
• External cross-port reliefs protect motor versus internal relief valves
• Fully enclosed motor compartment keeps out the debris that causes overheating issues, especially see in new Tier 4 version machines.
• No rear roller to bounce off stumps or pull cut debris along. Open design allows smoother operation
• Bi-directional cutting allows for control of the discharge angle, as well as doubling the use of the blades

Features include:

• Available in 60” and 72” cutting widths
• Chain curtain minimizes discharge
• Perimeter wire/vine guard on blade carrier
• 3” diameter cutting capacity
• Dual external crossover relief valves
• 4000 Series geroler motor
• Dual-direction cutting
• 1 year warranty

Features include:

• High torque piston motor is available in the high or low flow!
• The low flow version outperforms most competitors’ high flow models!
• Massive 1″ thick serrated blade carrier weighs over 500 lbs.
• Easy machine entry
• Adjustable skid shoes
• Cutter weighs over 2000 lbs.
• Large pressure gauge
• 1-year warranty

Features include:

• 10″ cutting capacity
• 72″ cutting width
• 4 double-sided blades
• Piston motor
• 1” thick blade carrier with serrated edge
• Visible pressure gauge to monitor workload
• Bolt-on wear shoes to adjust height
• Easy machine entry

Features include:

• Protected hoses
• Standard bolt-on-edge on dozer portion
• Front bolt-on-edge available
• Weld on shanks and teeth available

Features include:

• Available in 1/2 or 3/4 yard capacity
• Standard chute or hydraulic door
• Splash guard
• Removable chute for easy cleaning and transport

Features include:

• 6′ wide 1.5 yard capacity
• Skid steer quick attachment
• Drain holes in bottom to allow water to escape

Features include:

• Available in 72″ and 84″ widths

Features include:

• Low profile: 20″ high, 29″ deep
• Low profile, long  bottom: 20″ high, 39″ deep
• 60″ – 72″ uses 3/16″ wrap
• 78″ – 84″ uses 1/4″ wrap
• 3/4″ cutting edge

Features include:

• 32″ high back, 38″ bottom
• Mesh in back for increased visibility
• Ribs inside to strengthen floor and back
• Pre-drilled for bolt-on edge

Features include:

• 1/2″ floor
• double layer 1/4″ back
• heavily gusseted quick attach
• tooth buckets use a 1″ x 8″ cutting edge
• available in low profile, long bottom, and high capacity
• Low profile: 20” tall, 29” deep
• Long bottom: 20” tall, 35” deep

Features include:

• ¼” material in the back and floor
• Heavy top crossbar and boxed in bottom corner for strength
• 22” tall and 34” deep
• Smooth model includes a bolt-on-edge
• Rolled back for easy clean out
• Increased capacity over low profile
• Increased structure in damage prone areas

Features include:

• Electronic adjustment controls
• High-torque, planetary drive
• High drum weight = less vibration
• 5/8″ thick drum tube
• Easy access tooth replacement
• Water kit available
• Fine-cut drum available
• 16″-48″ Grinding Widths
• Up to 6″ Cutting Depth

Applications Include:

• Removing asphalt surfaces prior to overlay
• Widening shoulders
• Repairing potholes
• Restoring drainage lines
• Mixing stabilizing agents into base for a more durable repair

Features include:

• Manual adjustment controls
• Hydraulic side shift
• Direct drive
• High drum weight = less vibration
• 5/8” thick drum tube
• Easy access tooth replacement
• Water kit available
• Fine-cut drum available
• 12″-16″ Grinding Widths
• Up to 5″ Cutting Depth

APPLICATIONS INCLUDE:

• Removing asphalt surfaces prior to overlay
• Widening shoulders
• Repairing potholes
• Restoring drainage lines
• Mixing stabilizing agents into base for a more durable repair

Features include:

• Hydraulic adjustment controls
• Hydraulic side shift
• High-torque, planetary drive
• High drum weight = less vibration
• 1 1/2″ thick drum tube
• Easy access tooth replacement
• Water kit available
• Fine-cut drum available
• Hard facing & stand-off blocks
• Up to 8″ cutting depth

APPLICATION INCLUDE:

• Removing asphalt surfaces prior to overlay
• Widening shoulders
• Repairing potholes
• Restoring drainage lines
• Mixing stabilizing agents into base for a more durable repair

Features include:

• Available 44” and 60” widths
• High efficiency piston motor
• Weights: 44”= 1,725 lbs. and 60” = 2,432 lbs.
• 150cc motor requires 32-44 GPM, 3200-5000 PSI.
• 200cc motor requires 45-60 GPM, 3200-5000 PSI.
• 3/8″ thick deck & reinforced sides.
• Teeth on top, side & bottom of the carrier
• 1″ thick hinged deflector
• Throws material away from the machine.
• Can cut below ground surface

Features include:

• Low profile tooth anvil (carbide compatible)
• Secondary edge guard on the tooth anvil
• Heavy duty overhung load adapter
• Hydraulic motor case overpressure protection (COP)
• Heavy duty synchronous drive belt
• Serrated push bar
• Optional gate
• Long-life heavy duty drum bearings
• Single 1-inch high grade bolt tooth fastening system
• Reversible chipping tooth (4 times-Standard Tooth, 2 times- Carbide tooth)
• Tooth anvil with secondary edge guard
• Danfoss H1B 110cc 2 speed motor

Features include:

• 3/8” thick tines with 1/2” top clamps
• 25”H x 42”D opening inside of clamps
• Opens to 59” at tip of tines/clamp
• Dual acting cylinders
• Heavily reinforced mount
• Serrated tine tips to rip through roots

Features include:

• 1/2″ thick top clamps
• Cylinder protection covers
• Opens to 32″
• Best suited for machines up to 50HP or 1800 lb lift capacity
• Protected hoses

Features include:

• No pinch hose routing
• Bolt-on sides
• 3/4″ top tines
• Heavily reinforced top clamps

APPLICATION

• Demolition
• Recycling
• Transfer stations
• Tree work or wood processing
• Industrial use